Nipple Water Drinking Systems

Star Poultry produces Nipple Water Drinking Systems that provide dry grounds for broiler producers to meet their entire drinking system needs, and export them to various countries of the world, so that healthy living beings can be broiled. Our Nipple Water Drinking Systems are designed to provide the ideal water for chickens.
The most important feature of steel drinking systems is robustness. All nipples are made of high quality stainless steel, providing a long working life. For the freedom of movement of chickens, it increases the floor area. The system is self-cleaning and therefore does not require any cleaning during the production cycle. It also prevents the formation of bacteria.
Advantages of Nipple Water Drinking Systems;
Healthier and better nutritional requirements,
High quality stainless steel parts,
Extra long life,
Dry floors,
Easy assembling

This piece used in egg coops is 8mm in average length and made of 304 quality stainless steel. It features up and down operation, while delivering between 0.80ml and 0.90ml of water. To mount to the pipe, drill a hole of 8.8mm on the pipe. Care must be taken that nipple parts are not dropped or replaced during assembly.

Since this product is produced for egg hen, it only works up and down. It is made of 10mm long, stainless, 304 quality steel and has a special conical screw. An 8mm hole should be drilled in each place to attach. Since the nipple itself will open a thread on the pipe, there is no need to open one externally. The nipple hill must be mounted by screwing upwards so that it does not fall. It gives 0.80ml - 0.90ml of water per minute.

Made for meat patties. It works everywhere and gives water in every direction. It is made of 10mm, 304 quality stainless steel and has special conical screw. A hole of 8.8mm should be drilled at the point of attachment. The nipple hill should be mounted by screwing upwards so that it does not fall. Since the nipple itself will open a thread on the pipe, there is no need to open one externally. It gives 0.70ml - 0.80ml of water per minute. The difference from model 005 is that it is kept from pinch.

Made for meat patties. It works everywhere and gives water in every direction. It is made of 10mm, 304 quality stainless steel and has special conical screw. A hole of 8.8mm should be drilled at the point of attachment. The nipple hill should be mounted by screwing upwards so that it does not fall. Since the nipple itself will open a thread on the pipe, there is no need to open one externally. It gives 0.60ml - 0.80ml of water per minute. The difference from the 002 360° model is that it is gripped from the top.

Made for meat patties. It works everywhere and gives water in every direction. Made of special hard plastic, all internal parts are 304 quality stainless steel. It has a 14mm keyway. A hole of 8.8mm should be drilled in the pipe. Since the nipple itself will open a thread on the pipe, there is no need to open one externally. It gives 0.45ml - 0.60ml of water per minute.

Produced for egg hen. Made of special hard plastic, all internal parts are 304 quality stainless steel. It only works up and down. It has 10mm keyway. An 8.8mm hole should be drilled on the insert pipe. Since the nipple is a special conical cscrew and will open a thread on the pipe, there is no need to open one externally. It gives 0.70ml - 0.80ml of water per minute.

Made for meat patties. It works everywhere and gives water in every direction. Made of special hard plastic, all internal parts are 304 quality stainless steel. It only works up and down. It has 10mm keyway. An 8.8mm hole should be drilled on the insert pipe. Since the nipple is a special conical cscrew and will open a thread on the pipe, there is no need to open one externally. It gives 0.60ml - 0.80ml of water per minute.

Made for meat patties. It works everywhere and gives water in every direction. Made of special hard plastic, all internal parts are 304 quality stainless steel. It only works up and down. It has 12mm keyway. An 8.8mm hole should be drilled on the insert pipe. Since the nipple is a special conical cscrew and will open a thread on the pipe, there is no need to open one externally. It gives 0.70ml - 0.90ml of water per minute.

Made of special hard plastic, all internal parts are 304 quality stainless steel. Works with stainless steel ball system. It can be disassembled and cleaned. When attaching, attention should be paid to the 90° standstill. Due to the precision of the ball system, it is important that the water is filtered.

Made of high quality plastic suitable for hygienic and food. It controls the water pressure. It gives the desired efficiency at 70m. It is also possible to use it in the middle of the line. If it is used in the middle, the closed rear cover should be removed. Line cleaning can be done by pressing upwards quickly without turning the adjustment nut at the bottom of the regulator. This means that the end of the lines must be open, so that the cleaning takes place in a fluid way.

The cleaning type is different from model 033. When you open the tap, it automatically cleans according to the water pressure.

The O-ring reducer specially produced for the regulator can be produced upon request in the desired color.

The pipeline end is used with 033 hose. During cleaning, the screwdriver-lid is opened by turning it to the left. It is suitable for round and four corner pipes.

Pipe connection muffler that does not leak water automatically when fitted, without needing to glue or clamp.

It is used to connect pipes of 22mm x 22mm dimension. The raw material is PVS. It is recommended to make the connection with 020 connection wire.

Made for meat patties. This product is made of high quality plastic and hygienic. No interconnection is required during use. As shown in the picture on the right, the transport pipe, the water pipe and the dish are in the same place. The combination of the connecting rope and the shock pile provides the mounting advantage and simplicity.

Pipe connection muffler that does not leak water automatically when fitted, without needing to glue or clamp.

Produced for breeding. It has an overlying structure. Double collar. There is no possibility of dislodgement, fall and breakage. It is compatible with 002 360º nipple. This product is made of high quality plastic and hygienic.

This product is produced from a copolymer. Especially used in ball nipples. Cleaning is easy and hygienic. It is suitable for 22mm x 22mm PVC square pipe.

It is used for 10 days chick. As shown in the illustration on the right, It can be easily mounted as a push-up or padded clamp to the 002 or 003 egg nipple. Use is practical.