Egg Chick Cage Systems – Star Poultry

Galvanized steel sheet is used in the cage.
The pillars in the cage's frame are made of 2mm galvanized sheet.
The upper compartments of the cage are made of 1 mm galvanized sheet.
The lower compartments of the cage are made of 1mm galvanized sheet.
The eye compartments of the cage are made of 2mm galvanized steel.
The columns that make up the cage's belt bed are manufactured from 1mm galvanized sheet.
The cage's tape carrier worms are manufactured from 16mm galvanized pipe.
Cage feeder hangers are manufactured from 2mm galvanized sheet.
Cage feeders are manufactured from 0.8mm galvanized sheet.
The cage front pole and back case are made of 3mm galvanized sheet.
Front and rear wraps of the cage are made of 2mm galvanized sheet.
Intermediate divisions of the cage's eyes are made from galvanized dip.
The lids of the cage eyes are made of galvanized fabric.
The bottoms of the cage eyes are made of dipped galvanized fabric with a thickness of 19mm X 19mm and a thickness of 2mm.

Fodder feeding system is fully automatic; all galvanized sheet steel.
Adjustable knob cover is available to feed the chick in the 2nd floor feeders of the cage.
Thanks to specially designed feeders, even one day old chicks can easily reach the feed.
Feed trailers move on rails on cages by 0.75hp electric motors and imported steel ropes (PVC coated).
Feeders are specially designed to distribute the feed in equal quantities in the cage systems and to prevent the feed from overflowing the feeder.

There is a water line made of 1 line PVC pipe in each eye.
Each cage has 2 flex and 2 CLR brand nipples.
Each irrigation line has 1 CLR brand reservoir
The water coming from the network is sent to the water pipes with the reservoirs at the appropriate pressure.

Manure is transported with polypropylene plastic manure band which transports the manure under each layer and extending along the cage to the discharge band.
The manure band used is 1mm thick.
The movement is carried out with 1.5hp reduction motors for every 3 floors.
Thanks to the strippers available at each floor, the manure at the end of the poultry is delivered to the discharge band perfectly.
At the back of the cage, a storage system will be installed to prevent contamination by glare splashes.
The carrier rolls used in the hoods are specially rubber coated and the band shift is reduced to a minimum.
Manure conveyors are equipped with a 6mm thick rubber band with cord fabric, with front rollers and a 1.5hp reducer on the profile construction, working with moving rolls.